Lambrecht PROFESSIONAL-IX 3.0 Anemometer

This set of wind sensors or anemometer Lambrecht PROFESSIONAL-IX 3.0 is an instrument specially made to withstand particularly cold climates , such as the polar regions. It is a heated equipment with a power of 125W, with which the formation of ice on the sensors is avoided.

This equipment is specially intended for meteorological and research stations in polar areas , where these environmental conditions are extreme. It is also prepared to withstand gusts of up to 220km / h . The manufacturing material is high quality aluminum, resistant to sea corrosion .
The weather vane, made of aluminum, has a precision of +/- 1º and a starting speed of 0.4m / s. The measurement principle is by "contactless". It is heated to 125W.
The anemometer or cups, measure wind gusts of up to 200km / h with an accuracy of 0.1m / s . The starting speed is 0.4m / s from which the equipment begins to operate. Made of especially resistant aluminum and with a 125W heated system.
The equipment incorporates 15m of cable , the plug or connection plug and the possibility of incorporating a TROPOS or SYNMET datalogger for data recording.
There are several possibilities or variants depending on the output power or the frequency transmission:

• 0-20mA
  
• 4-20mA
  
• 0-500Hz
  

Characteristics:

• Wind direction of the measuring range: 0 ... 360 ° • Wind speed: 0.4 ... 50 m / s
  
• Wind direction accuracy: ± 1 ° • Wind speed: ± 2% FS at 0.4 ... 50 m / s
  
• Wind direction resolution: <1 ° • Wind speed: <0.1 m / s
  
• Initial value 0.4 m / s
  
• Supply voltage sensor 24 (20 ... 28) VDC • heating 24 VDC • 125 W
  
• Non-contact measurement principle • Hall Sensor Array
  
• Wind direction dimensions: wind vane L 195 mm - H 295 mm • wind speed: rotor cup Ø 218 mm - H 241 mm
  
• Seawater-resistant aluminum housing • with special coating • IP 65 in vertical position
  
• Approximate weight. 0.8 kg