1 / 3

Milwaukee MW101 Digital PH Meter

Brand: Milwaukee

Reference: 8,4E+12

€132.69

Product sold out, not available at this time.

Description

Digital and portable PH meter, suitable to measure the PH of liquids and soft solids like food ground. A precise instrument, easy to use and transport.

Details

More information

Ideal for agriculture, hydroponics, aquariums and food.

The MW101 Precision PH Meter is a portable PH meter with 1 meter cable probe, BNC connector.
The measurement range of the MW101 precision PH meter is from 0.01 to 14.01 pH; Resolution: 0.01pH
The MW101 precision PH meter is calibrated manually, in 2 points (PH7.01 and PH 4.01 / 10.01); Manual temperature compensation. Wide screen, ergonomic shape, safety strap; The electronics of the PH MW101 meter are modern for fast and efficient measurement.
The PH probe (ref: SE220) is a double junction electrode filled with electrolyte solution. Electrode suitable for MW100 - MW101 - MW102.
The MW101 Precision PH Meter is ideal for field measurements.
The MW101 Precision PH Meter is well suited for agriculture, hydroponics, aquariums, fish farming, education, laboratories, swimming pools.

MW101 Precision PH Meter Operation

The MW101 precision PH meter is delivered complete, with a 9V battery. Open the battery compartment cover on the back. Insert the battery respecting the good polarity.
Always remove the electrode shield before use. In the event that the electrode was left dry, immerse it (up to 2.5cm) a few minutes in washing liquid to reactivate it
Connect the electrode to the socket located above the meter.
Make sure the meter was calibrated before use.
Immerse the pH electrode (2.5 cm) in the supplied liquid.
Turn on the meter by pressing the ON / OFF button
Wait for the data to stabilize before taking the data by the way.
After measurement, turn off the meter and replace the cap on the electrode with a few drops of storage fluid inside.

Calibration of the PH meter precision MW101:

Remove the protection from the electrode.
Dip the electrode in a pH7.01 calibration liquid envelope and wait for the data to stabilize.
With the PH7 black calibration button, adjust the data to pH7.0
Open an envelope of pH4.01 calibration liquid and spend a small amount of it to wash the electrode.
Immerse the electrode in the pH4.01 liquid envelope and read the data once it has stabilized.
Sets the PH4 / PH10 button to the PH4.0 data.
The meter is calibrated and ready to measure.
It is advisable to calibrate the meter at least once a month, or after a long unused season or after an electrode change.