Optika OPTIKAM PRO LT camera

The Optika OPTIKAM PRO LT camera offers the best features to satisfy researchers and scientific professionals . Its improved CMOS sensor increases the capacity for resolution and definition of colors - The USB connection to the computer and the capture and editing program Optika Vision Lite Pro Plus , configure a very advanced work equipment for your trinocular microscope.
Two models are available, with 3.1 and 5 megapixel resolution respectively. In all of them the CMOS sensor is of the highest quality, 1/2 "or 1 / 2.5" in size. The resolution of the image obtained is 2048x1536 in the 3mpx version and 2592x1944 in the 5mpx version. The frame rate at maximum resolution reaches 12f / s in the 3mpx model and 3f / s in the 5mpx model. Another fundamental characteristic for working in low light is the exposure time, in this case both models can offer up to 26 seconds of exposure .
The adaptation of the camera through C-mount is only possible in trinocular heads of both microscopes and stereomicroscopes, and requires the use of adapters, these adapters are not included:

• Adapter: M-114: for B-193, B-293, B-383, B-800 ERGO, B-1000 ERGO and IM-2 ERGO
  
• Adapter: M-789.1 for B-500, B-800, B-1000 and IM-3
  
• Adapter: M-778 for IM-2
  
• Adapter: ST-419 for LAB-30
  
• Adapter: ST-090 for SZM-SZMD
  
• Adapter: ST-090.1 for SZM, SZM-GEM2 and OPTIGEM2
  
• Adapter: ST-147.1 for SZN and OPTIGEM4
  
• Adapter: ST-170 + M-114 for SZP
  

The import and the external signal is carried out via USB 2.0 , as well as the power of the camera, which also comes from the USB connection to the PC. The cable is 3m long .
The OPTIKAM PRO camera incorporates the Optika Vision Pro Plus software, an advanced computer program for the detailed analysis of images obtained by the microscope. Includes capture, adjust, measure and retouch tools . With these tools you can modify the contrast, saturation, color, brightness, exposure, white balance, focus etc ... It is especially suitable for the analysis of fluorescence and combined fluorescence images.
Optika Vision ProPlus is compatible with all versions of the Windows operating system.
OPTIKAM PRO 3mpx features:

• Digital camera resolution: 3.2 MegaPixels
  
• Analog camera resolution: NO
  
• Output signal: USB 2.0
  
• Audio signal: NO
  
• Sensor size: 1 \ 2 "
  
• Sensor technology: CMOS
  
• Image format: 4 \ 3
  
• Image size: 2048 x 1536
  
• Pixel dimension: 3.2 x 3.2 microns
  
• Full-resolution frames: 12 fps (2048x1536)
  
• Frames in other resolutions: 24 fps (1024x768)
  
• Sensitivity: 1.0V / Lux-second (550nm)
  
• Signal / noise ratio: 43 dB
  
• Dynamic Range: 63 dB
  
• Maximum exposure time: 26 sec.
  
• ADC conversion: 10 BIT
  
• Color Depth: 8 BIT
  
• Memory card: NO
  
• External memory card: NO
  
• External PC camera connector: USB
  
• Cooling system: NO
  
• External cooling connector: NO
  
• IR filter on camera housing: BP 680 nm
  
• Auto White Balance: Auto / Man
  
• Automatic gain control: Auto / Man
  
• Automatic backlight control: Auto / Man
  
• Exposure control: Auto / Man
  
• C-Mount: SI (Stainless Steel)
  
• CS mount: NO
  

OPTIKAM PRO 5mpx features:

• Digital Camera Resolution: 5.0 MegaPixels
  
• Analog camera resolution: NO
  
• Output signal: USB 2.0
  
• Audio signal: NO
  
• Sensor size: 1 \ 2,5 "
  
• Sensor technology: CMOS
  
• Image format: 4 \ 3
  
• Image size: 2592 x 1944
  
• Pixel dimension: 2.2 x 2.2 microns
  
• Full-resolution frames: 3 fps (2592 x 1944)
  
• Frames in other resolutions: 12 fps (1296 x 972)
  
• Sensitivity: 0.53 V / Lux-sec. (550 nm)
  
• Signal / noise ratio: 40.5 dB
  
• Dynamic Range: 69 dB
  
• Maximum exposure time: 26 sec.
  
• Conversion: ADC 12 BIT
  
• Color Depth: 8 BIT
  
• Memory card: NO
  
• External memory card: NO
  
• External PC camera connector: USB
  
• Cooling system: NO
  
• External cooling connector: NO
  
• IR filter on camera housing: BP 680 nm
  
• Auto White Balance: Auto / Man
  
• Automatic gain control: Auto / Man
  
• Automatic backlight control: Auto / Man
  
• Exposure control: Auto / Man
  
• C-Mount: SI (Stainless Steel)
  
• CS mount: NO