Testo plastic temperature universal pH electrode

Technical specifications:

The Testo Universal Plastic pH Electrode, with integrated Pt1000 temperature sensor, is an instrument that can be used with any Testo pH meter with BNC connection, which allows pH measurements to be made in both water and wastewater, quickly and precise, being equipped with a single-pore diaphragm, which resists clogging.

Its unbreakable plastic coating guarantees its durability which, under favorable conditions, can reach 3 years (at room temperature), while at 80 ° C it takes about 3 months.

It can be used with the Testo 230 and Testo 206-pH3 pH and temperature meters, whose data is transmitted from the probe through a BNC connector.


Among other characteristics of the Testo Plastic Temperature Universal pH Electrode, the following can be mentioned:

- Can measure in a pH range located from 0 to 14 pH,

- It can measure temperature in a range ranging from 0 ° C to 60 ° C,

- The tube of your probe has a length of 120 mm and its cable measures 1,200 mm,

- The tip of your probe is 12mm long,

- The tube of your probe has a diameter of 12mm and the tip of the tube of your probe has a diameter of 4mm,

- Its weight is 96 grams,

- It uses a totally maintenance-free electrolyte gel,

- It has a fixed cable with BNC type connector,

- It has a very fast response time, which can be below 5 seconds,

- Its integrated temperature sensor Pt1000 allows to measure the pH of the water with high precision, automatically compensated by temperature,

- With the purchase of the Testo Plastic Temperature Universal pH Electrode, a fixed cable with BNC connector and the soaking plug are also included.